Hot to Control Water Heater Scale

Posted by on Aug 25, 2016 in Electric Water Heater Repair, Gas Water Heater Repair, Water Heater Repair

There are negative impacts on home appliances, including the hot water heater, if Cape Coral house owners have hard water. Hard water will certainly help make scale buildup inside the water heater take place quicker. Scale is primarily calcium and magnesium and looks like white particles. The long-term results of scale build-up will be to lower the lifespan of the water heater. In order to help manage this happening, this article is going to discuss a number of ways in order to help avoid it from being an issue.

Water Heater Storage Tank DrainingWater Heater Scale Buildup
Emptying the water storage tank will remove the mineral bits inside the storage tank. If one knows that water is very hard, this process should be done about two times a year in order to help regulate scale buildup. We will state the basic actions involved in doing so here, but they are implied for educational purposes only. It would be best to permit us to execute a water heater flush at your residence.

First shut off the water heater’s gas or electricity. Shut the cold water supply shutoff so fresh water is not going into while it is being emptied and replenishing it. In order to make it a quicker procedure, open up a hot water sink faucet that is close in distance to the hot water heater system. Attach a yard hose to the drain valve, situated at the bottom of the heater, and put the other end of the yard hose either outside or in a floor drain for the heater to clear. The water leaving the hot water heater will be hot, so care needs to be taken. After the storage tank is empty, close the drain shutoff, open up the cold water supply once again, and turn back on the gas or power.

Water Heater Temperature Level Setting
Heat is one root cause of scale build-up happening. The hotter the water in the water heater is, the a lot more calcium and magnesium will create strong deposits on the heating elements inside the water tank. If the thermostat is positioned above it needs to be, the quicker the build up will occur. Though there are reasons for having a high or reduced temperature setting that largely depend on any type of health concerns in the residence, but we will not be entering into those details below. Manufacturers usually pre-set and recommend a temperature level setting at 120 degrees Fahrenheit. If it is established greater than this, scale will certainly gather much faster. Below are much more pointers that will assist if one water is very hard.

Using vinegar may chemically impede scale also. Vinegar, though a weak acid, is safe to utilize. It is nice to utilize vinegar to assist cleanse the storage tank after draining it. Prior to reconnecting the cold water supply and turning the power back on, close the drain valve and put a gallon of cider vinegar right into the tank. Wait at the very least 6 hours for it to sit. Certainly, choose a time for draining the water heater when no hot water will be needed for a while. Afterward, open up the drain shutoff with the drain garden hose attached and let some water flow through to eliminate the vinegar. Close the draining valve and reconnect the electrical power.

Water Softener
Among one of the most useful means in order to help with hard water concerns throughout the residence, not simply with a water heater, is to install a water softening system. In easy terms, it will get rid of the ions dissolved in the water that trigger the calcium and magnesium to create. Preserving a water softener is very easy enough to do. Sodium is normally the chemical used to replace the calcium and magnesium ions, they will need to be changed periodically. The benefits to the entire plumbing system with having the ability to control hard water are large and can minimize requiring unforeseen water heater repairs and plumbing repairs.

Around the Internet Resources